How To Reset Mifo Headphones (2024)

FAQs

How To Reset Mifo Headphones? ›

RESET THE EARBUDS

Check for Pairing Issues: Ensure that both earbuds are in pairing mode and properly synchronized with each other. Occasionally, one earbud may connect while the other doesn't. Follow the pairing process recommended by Mifo for the O5 Plus to ensure both earbuds connect simultaneously.

You can also press and hold the power button on either earbud for 8 seconds to pair them. Mifo has included a portable power bank and USB-C cable (a nice touch) that allows you to connect your smartphone to your case for on-the-go charging.

On most phones, you can reset your phone through the Settings app. If you can't open your phone's Settings app, you can try factory resetting your phone using its power and volume buttons. We recommend checking your manufacturer's support site for device-specific instructions.

Sometimes a button is provided and sometimes it is not. If it is not provided then the reset can be achieved by disconnecting the earbuds, draining out the battery, recharging the, and then reconnecting them. But if the reset does not solve your issues then you need to contact the manufacturer.

RESET THE EARBUDS

In the rare case of repeated failed pairing or an unstable signal, press and hold the on/off button of both earbuds simultaneously for 10 seconds until the indicator on each earbud blinks red twice. Place back into the charging case for a few seconds, then remove to re-activate.

The mifo 07 features touch control, and will turn off automatically if not paired with a device for 3 minutes. Place the earbuds into the charging case for 1 minute, A white LED will flash. Tap each earbud 5 times separately to reset. If successful, the white LED will flash quickly 5 times.

Open the charging case(Don't take out the earbuds), find the "mifo S" on your device then to pair it. Take out the earbuds when it shows connected on the device.

How do you manually pair earbuds? ›

First, put the headphones in pairing mode. Usually, you do that by holding down the power button; the headphones often need to be turned off first. Many pairs trigger a blinking light after a few seconds to indicate the pairing mode is on, and sometimes there's also an audio cue.

Double-tap the button on the right earbud, then on the third tap - press and hold the button for more than 5 seconds (until the unit shuts off). This restores the earbuds to the factory defaults. TWS must be connected to perform the reset, so neither of the earbuds should be off or in the charging case.

Turn off your headset. Hold the power and volume (-) button on your headset down simultaneously until the boot screen loads on your headset. Use the volume buttons on your headset to highlight Factory Reset and press the power button. Use the volume buttons on your headset to highlight Yes and press the power button.

Turn off Bluetooth on your device, then turn it back on. If you've previously paired your earbuds with your device, Remove / Forget the earbuds, then retry the pairing process. Restart your device. Reset your earbuds by holding the button inside of the charge case with both earbuds in the case for 5 seconds.

If you use an Android phone, the first two steps are the same, then: 3. Go to Settings, then Connected Devices, then hit the cog icon next to your AirPods or AirPods Pro. 4.